Where to Place Landscape Lighting Around Your Home
Where to place landscape lighting comes down to three priorities, in this order: the places where someone could trip, the features you want to see from the street, and the areas where you spend time after dark. That means steps, paths and entries first, then the front of the house and one or two trees, then the patio or deck. A few well-placed fixtures do more than many scattered ones.
This guide covers each zone, the techniques that work in it, how far apart to set fixtures, what low voltage means, and the mistakes that are easy to avoid.
Which areas should be lit first?
Start with safety and entries. These are the lights you will use every night, and they set the level of brightness for everything else.
- Steps and changes in level, including a single step down to a patio
- The path from the driveway or street to the front door
- The front door, side door and garage entry
- The edge of a driveway where it meets a drop or a wall
- Gates and the route to the trash and recycling area
Walk the yard at night with a flashlight before choosing anything. The spots where you slow down or look at your feet are the ones that need light.
How should paths and steps be lit?
With low, shielded light aimed at the ground. The goal is to see the surface, not the bulb.
- Path lights: set a little back from the edge and staggered from side to side instead of lined up in two rows
- Path lights spacing: often somewhere around 6 to 10 feet apart, close enough that the pools of light nearly meet. Adjust on site, since fixtures differ
- Step lights: recessed into risers or side walls, or placed under the tread nosing
- Wall and cap lights: fitted under the cap of a seat wall or retaining wall to wash the surface below
- Downlights: mounted in a tree or under an eave to cover a wide area of path softly
Fixtures with a shield or hat over the lamp keep glare out of the eyes of someone walking toward them.
How do you light the house and the trees?
Pick a few features and light them from below or from the side. Uplighting trees and washing a wall with light give depth to the whole front yard.
- Uplighting: a fixture at the base aimed up into the canopy or along the trunk. Trees with interesting bark or branching show best
- Two fixtures on a large tree avoid a flat, one-sided look
- Wall washing: a wide beam set a short distance from the facade for even light on brick, stone or siding
- Grazing: a fixture close to a textured wall, aimed along it, brings out stone and brick
- Columns and architectural details: one narrow beam each
- Downlighting from high in a tree: gives a soft, moonlit effect on lawn and beds
Leave some areas dark. Contrast is what makes the lit features stand out, and it keeps light out of bedroom windows.
How should patios, decks and seating areas be lit?
Softly, from more than one direction, and never straight into the eyes of someone sitting down.
- Lights under bench seats, counter edges and wall caps
- Small downlights from a pergola, an eave or a tree
- Step and post lights on decks, placed to show the edges
- A separate, brighter light at the grill or outdoor kitchen
- Gentle lighting near water features and fire pits so their own glow is not washed out
Putting different areas on separate zones or dimmers lets you light the path every night and the patio only when you use it.
What is low voltage landscape lighting?
It is a system that runs on about 12 volts through a transformer plugged into or wired to a standard outdoor circuit. Low voltage landscape lighting is the usual choice for homes.
- The transformer reduces household voltage and often includes a timer or a light sensor
- Cable runs from the transformer to the fixtures and is buried shallow
- LED fixtures use little power and last far longer than the older halogen lamps
- The transformer must be sized for the total load, and long cable runs need planning so the last fixtures are not dim
- Fixtures can be moved or added later with far less work than line-voltage lights
Line-voltage lighting, such as fixtures on the house or post lamps, is electrical work for a licensed electrician. Confirm local requirements for any outdoor wiring.
What are the most common landscape lighting mistakes?
Most landscape lighting mistakes come from too many fixtures or from light aimed the wrong way.
- The runway effect: path lights in two straight, evenly spaced rows
- Glare: bare lamps visible from the street, the door or the patio
- Everything lit to the same brightness, so nothing stands out
- Mixed color temperatures, with some fixtures warm and others bluish
- Light spilling into a neighbor's windows or up into the sky
- Fixtures placed where a mower or a car will hit them
- Forgetting that plants grow and will cover or block a fixture in a few years
A good test is to set fixtures temporarily and look at them at night before burying any cable.
Georgia Landscaping & Hardscaping LLC lists lighting installation and landscape design among its landscaping services. Ask whether lighting can be planned along with new beds, walls or a patio, since cable is easiest to run before those are finished. The company's page on landscaping in Roswell, GA describes its work north of Atlanta.
Frequently asked questions about landscape lighting placement
How many landscape lights do I need?
There is no fixed number. A typical front yard is often well served by lights on the path, the entry, the front of the house and one or two trees. Start with the safety areas and add only where something still looks dark or flat.
Should landscape lights stay on all night?
Many homeowners run them from dusk until late evening on a timer or sensor, with only the entry and path lights staying on longer. LED systems use little electricity, so the choice is mostly about preference and neighbors.
Is solar landscape lighting good enough?
Solar stakes are easy to install and work as markers in sunny spots. They are usually dimmer, less consistent in winter and in shade, and not suited to uplighting trees or lighting steps reliably.
What color light is best for landscape lighting?
A warm white is the common choice for homes, because it flatters brick, stone, wood and plants. Whatever you pick, keep it the same across the yard.
Plan your outdoor lighting with Georgia Landscaping & Hardscaping LLC
Georgia Landscaping & Hardscaping LLC is a landscaping and hardscaping company based in Marietta, GA that offers lighting installation, landscape design, retaining walls and sod installation. It serves Marietta, Atlanta, Roswell, Smyrna, Kennesaw and Acworth. To talk about lighting for your yard, call 404-791-5609 or contact Georgia Landscaping & Hardscaping LLC.
